Wax your stick. Rub some on your paddle shaft to make a nice tacky surface to increase your grip.
Enhance your gripping power with Sticky Stuff! Base coat (first application) should be applied approximately 1mm in thickness on paddle shaft where grip is needed. Works well when applied to cockpit rim for bomber seal with spray skirt.
Apply a new top coat over base coat before starting a new day of paddling. If sticky stuff softens due to sun exposure simply immerse in water to solidify.
After extended use Sticky Stuff may become fouled from dirt, hand oils and debris. To remove simply set paddle in sun to soften wax and wipe off excess with a rag. A hair dryer works well when the sun isn’t shining!
Proprietary wax formulation
Stable up to 160°F
55 gram bar